Manufacturer of high pressure ball valve

Manufacturer of high pressure ball valve. Specifications include port size ranging from 1/4 in. to 1 in., pressure ranging from 4600 psi to 7000 psi, temperature ranging from minus 20 degrees F to 150 degrees F. Features include chrome plated black oxide finish balls, cast steel multi positional handle, Buna N o-ring, NPT, & SAE o-ring. Valves are available in zinc plated carbon steel with black oxide finish. Valves are used in high-pressure hydraulic application.
Ball valves are available in 2-way, 3 way ball valves, 4-way, and 5-way designs with pressures to 20,000 PSI and a wide range of connections including male and female NPT, low-pressure compression fittings, medium- and high-pressure tube ends, medium- and high-pressure female, JIC 37° flare, SAE O-ring boss, socket-weld, butt weld fittings, and metric connections. They are available with special seal materials or manufactured from any machinable material for extreme applications. They also can be fitted with pneumatic or electric actuators for remote control.

A Trunnion ball valve has mechanical anchoring of the ball

A Trunnion ball valve has mechanical anchoring of the ball at the top and the bottom, suitablf ro larger and higher pressure services. To ensure tight sealing at low pressure, high tensile springs force the seats against the ball while at higher pressure, the medium pressure pushes the upstream seat towards the ball.
For trunnion mounted Ball valves size NPS 6 (ND 150) and above, it comes with provisions for sealant injection on both the stem and seat while for sizes NPS 5 (DN 125) and below on body cavity. In case of failed underperformed seals, a temporary emergency seal can be achieved by injecting sealants.

Ball Valve and Controls trunnion design

Ball valves and Controls trunnion design ball valves incorporate the use of upper and lower supports  to retain the ball under pressure. ball Valve and Controls API 6D Trunnion ball valve have a secondary sealant injection system for stem seals and seats in the event of providing a temporary seal to an otherwise damaged area. The Global Valve and Controls trunnion ball valve design using the upper and lower trunnion plate system essentially doubles the safety and reliability of a standard trunnion ball valve.
The Ball valves permits the valve to be installed in either direction, since the trunnion prevents the ball from shifting -- or worse, blowing out – under high pressure applications.
Another important benefit of the Ball Valve and Controls trunnion plate system design is that it allows the ball to only rotate a quarter turn with no hysteresis thus more control and reliability under extreme applications.
Ball Valve and Controls standard API 6D trunnion ball valves use materials in accordance with NACE MR0175/ISO15156. In order to ensure compliance customers must provide application specific operating conditions.

High Pressure Equipment

High Pressure Equipment offers two styles of Ball valves (free floating and trunion) to provide effective shut-off of liquid or gas flow. Two-way ball valves offer complete shut-off with a convenient 1/4 turn.High Pressure Equipment Company offers air operated actuators to accommodate remote operation. Ball Valve actuators are available for remote control of ball valves.
The Triad series VS high pressure ball valve offer full port 7252 psi rated valves for sizes 1/4" ~ 1/2", 6092 psi for sizes 3/4" ~ 2" and 3000 psi for sizes 2-1/2" ~ 4" and are suitable for steam, hydraulics, oil and gas production and all high pressure fluid applications. The VS series valves are used quite extensively in areas requiring a full port high pressure rated valve in large sizes.

Manufacturer of high-pressure ball valves

Manufacturer of high pressure ball valve. Specifications include port size ranging from 1/4 in. to 1 in., pressure ranging from 4600 psi to 7000 psi, temperature ranging from minus 20 degrees F to 150 degrees F. Features include chrome plated black oxide finish balls, cast steel multi positional handle, Buna N o-ring, NPT, & SAE o-ring. valves are available in zinc plated carbon steel with black oxide finish. Valves are used in high-pressure hydraulic application.
Manufacturer of standard and custom welded seal bleed Ball valves used in high pressure and high temperature applications. Titanium, zirconium, cast carbon steel and duplex stainless steel materials worked with. Additional types include trunnion mounted, floating, reducing and full bore ball valves. Features include seat design for independent sealing simultaneously upstream and downstream. Can be used in extreme industrial and severe service applications. Suitable for devices that require venting and draining of line fluids. Oil, gas, chemical and hydroelectric power industries served.

Specifications for Stainless Steel Ball Valves

The stainless steel ball valve makes cleaning a breeze, which means keeping your valves up to sanitary code is made easy. The multi-purpose manual lever makes using the stainless steel Ball valves simple. Since stainless steel is corrosion resistant, this valve can be used in a number of applications that include; gas, steam, water, and chemical utility services. The possibilities are endless with the stainless steel ball valve.
Specifications for Stainless Steel Ball Valves
1,Threaded or Socket Weld ends
2,1-2-3 Piece styles available
3,Male NPT x Female NPT ends available
4,Sizes range from 1/4 inch to 2 inches
5,Available in Full Port or Reduced

stainless steel ball valve are almost a necessity in homebrewing

stainless steel ball valve are almost a necessity in homebrewing.  These are most commonly used on your kettle, allowing you to control the flow of your liquids during transfers.  Using stainless steel is recommended, as these will come in direct contact with your wort, and using anything other than stainless could leave a metalic taste in your beer.  Stainless steel is also easier to keep clean, and will last longer.
Our stainless steel ball valves are ideal for water, chemical, gas, steam, petrochemical and general use/utility services and applications. Our stainless steel needle valves are always shipping out of our Chinese factory location.  If there is a ball valve you have question on, or if you do not see a valve that meets your specifications, please contact our sales staff for immediate assistance.